What pens do you use to draw on surfboards

Yes you can draw a design with Posca Paint Pens on a new surfboard. Spray Krylon Clear Coat over the artwork to protect it from scratching off.

What do you use to draw on surfboards?

Water-based acrylic paints are ideal for surfboards. This is because the acrylic binds to the fiberglass of your board without damaging it. Acrylics will keep their shine for a long time, and are very water-resistant.

How do you draw on a Posca pen surfboard?

We used Posca pens, but there are a few other brands you can buy also. Just press the tip against your board a few times, and the paint will start flowing out. Then you can just use it like a marker. You can buy paint pens with different tip thicknesses, if you are painting a design that requires a lot of precision.

Can you use Sharpies on surfboards?

Sharpie Markers As we mentioned before, sharpies do make water-based paint markers, and these are a good choice if you cannot get a hold of Posca pens. … If you do use the regular sharpie, be careful of the lacquer you use to finish the board.

Do paint pens work on surfboards?

The paint pen nibs are 4mm in diameter (reversible to 1mm) and perfect for any type of paint project on a surfboard. … Surfpaints can be transported anywhere in the world and great for a surf trip, home project or family holiday. It’s that easy!

How do you remove Sharpie from a surfboard?

Use a dry erase marker. Go over the sharpie with a dry erase and then wipe the dry erase marker off with a dry cloth.

Can you draw on your surfboard?

Yes you can draw a design with Posca Paint Pens on a new surfboard. Spray Krylon Clear Coat over the artwork to protect it from scratching off.

How do you prepare a surfboard for painting?

Remove any wax on your surfboard. Scrape the wax off your surfboard. …
Rub with acetone. Remove wax residue with acetone. …
Sand. Sand your surfboard. …
Wipe off with wet paper towel. Wipe board with damp paper towel. …
Tape off “non-paint” areas. …
Paint. …
Clear coat finish. …
Cure.

How do you remove paint from a surfboard?

I would use a little acetone – but be careful as it will easly eat thru the resin. I think using a solvent like paint thinner – that’s not as strong might work better – but once you are thru the clearcoat and paint- switch to a buffer and buff it out with rubbing compound – like 1600 grit rubbing compound.

How do you seal Posca pens?

To seal your Posca pen paint onto a plastic surface, simply apply your paint using the pens as explained earlier in the article and then leave it to dry on the plastic surface. Once the paint has dried you then spray your sealing agent over the plastic surface and leave the sealant to dry.

Article first time published on

How do you seal posca on a surfboard?

I use a clear acrylic spray to seal the Poscas. I’ll apply two coats, then lightly wet sandpaper the surface, and then I’ll add one more coat. As soon as it’s dry, you can take it surfing. And if the pool you’re surfing is chlorinated don’t worry, chlorine will not mess up your paint job.

What is an acrylic marker?

A new way to paint. … Just the finest quality professional acrylic paint in a fine art, marker-style pen. Acrylic Marker gives you the ultimate control. Made with highly lightfast artist-quality pigments in a choice of two sizes, with replaceable nibs.

How do you paint a decorative surfboard?

Spray Paint A Surfboard. The first thing you have to do is clean the surface you are going to paint with acetone. …
Get Creative With Painter’s Tape. …
Take It One Section At a Time. …
Blending Colors. …
Using Paint Pens. …
Painting A Surfboard That is Not Going To Be Surfed On. …
Get To Work.

How do you remove Sharpie from fiberglass?

You can use WD-40 to clean marker off of glass, dishes, and smooth furniture. Spray a small amount on a paper towel and wipe it away. For tips about how to use nail polish remover to clean off stubborn permanent marker stains, keep reading!

How do you remove Sharpie from epoxy?

Color over the permanent marker you wish to remove with a dry-erase marker.
Wipe over the area with a rag, and the permanent marker should come right off along with the dry-erase marker.
Repeat if any permanent marker remains.

Can you use nail polish remover on surfboards?

Might be able to remove the sticker residue w/ nail polish remover or acetone, but don’t use too much and make sure you wash it off right away when your done.

Is acetone safe for surfboards?

You can use acetone or plain flour to achieve a wax-free shiny look. Just dab your paper towel in acetone and rub it on your board. If you are using flour, just spread it all over your board and disperse it properly.

How do I paint my SurfBoard epoxy?

Epoxy surfboards have glassing features similar to standard polyurethane boards and can be painted in the same manner. Use the wax scraper and cleaner to completely remove any wax and oils left on the board’s glass. Any oils will hamper the paint job so be sure to clean the board thoroughly.

How do you whiten yellowed surfboards?

It says: “For a quick and effective way to remove some of the yellowing that has occurred to the fiberglass lamination, use a 3M Scotch Brite pad. By using a gentle application to the surface of the board, you’ll notice an immediate result.”

Can u spray paint a surfboard?

Spray painting a surfboard is easy, but you should follow a few guidelines as there’s no undo button. Make sure to wear gloves and a mask and do it in a place where you know you won’t be painting furniture, floors, or other objects. Spend as much time as you can cleaning the surfboard that you’re about to paint.

Are black surfboards bad?

A lighter board is far more forgiving of this mistake, a darker board will have irreparable damage done as a result of your mental lapse. A white or light colored surfboard left in a car is not good, but a dark surfboard left in a car is many times worse in terms of damage done to the board.