What is XP drywall

XP® Gypsum Board was designed to provide extra protection against mold and mildew compared to standard gypsum board products. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth.

What kind of drywall is mold resistant?

Green drywall is a type of drywall that’s mold resistant and is used in applications where moisture can be an issue—so most commonly, bathrooms.

What is purple sheetrock used for?

Purple drywall offers the same advantages as regular drywall, but with superior moisture- and mold-resistant characteristics. It can be used with all wall and ceiling applications and is ideally suited where enhanced moisture and mold resistance is desired.

What is the most durable drywall?

Extreme Impact Resistant Drywall with M2Tech® Extreme Impact provides greater resistance to impact, abuse and sound transmission in high traffic areas than standard drywall. Also made with proprietary M2Tech technology, Extreme Impact provides enhanced moisture and mold resistance.

Can you make regular drywall mold resistant?

Preventing mold growth on drywall can be approached via two strategies: … This form of mold-resistant drywall typically uses fiberglass mesh instead of paper for the facing and backing. Because fiberglass is a non-organic material, mold has no food source necessary to colonize for it to colonize.

What is the best drywall to use in a house?

1/2-inch drywall is the most versatile board and common thickness for the 16-inch on-center interior walls in most homes. It offers a good balance between strength and weight. 5/8-inch drywall is a heavier product that resists sagging in ceilings and in 24-inch on-center walls.

Is mold resistant drywall worth it?

Mold resistant drywall grows mold and mildew much slower than regular drywall, but it’s only worth the investment if you install it in rooms that are most prone to damp problems and if you put preventative efforts into keeping your interior dry and moisture-free.

Which brand of drywall is best?

A product like CertainTeed’s M2Tech® Moisture & Mold Resistant Drywall is a great all-around choice because it can achieve the highest standards for mold-and-moisture resistance set by ASTM International while protecting against mold, which can be expensive and time-consuming to fix.

When should you use 3/8 drywall?

Just slightly thicker than 1/4-inch drywall, 3/8-inch drywall is also a good choice for curved walls. This thickness is most often used to repair existing drywall that needs patching. 1/2-Inch Drywall: Most drywall measures 1/2-inch thick.

What size screw should I use for 1/2 drywall?

Choosing the right drywall screw Most common — 1-1/4”: Use 1-1/4” drywall screws to secure 1/2″ drywall installed on wood-stud walls. These coarse-thread screws typically feature phosphate coatings, which better protect against rust compared to zinc coatings.

Article first time published on

Whats better green or purple drywall?

“Green drywall (also known as greenboard) is only moisture-resistant. PURPLE®drywall, only made by National Gypsum, is superior because it offers moisture, mold and mildew resistance. In addition, many PURPLE® drywall products offer added benefits, including resistance to scratches, scuffs, dents and sound.

What is yellow drywall?

Left unprimed, drywall starts to yellow within a few weeks. The yellow will bleed right through most lightweight joint compounds and typical drywall primers, which is why it’s important to prime right after drywall finishing is complete. … When the primer is dry, you can paint with a regular latex paint.

Is Green drywall necessary?

Green boards are often required by local building codes to be used as a backing for tiles and wall panels in areas that are exposed to moisture; this includes bathrooms, laundry rooms, and kitchens. However, they are not allowed for use in parts of the home that have excess humidity, like near indoor pools.

Does Green Board prevent mold?

In addition to mold-resistant drywall, greenboard is often used in bathrooms and showers as a mold-preventative building material. … If you’re interested in keeping your home healthy by lessening the risk of mold in your home, you may want to invest in prevention up front, in the form of mold-resistant drywall.

What drywall is used for showers?

Greenboard Drywall Definition Cement backer board such as Durock is best used for tile in highly wet applications such as shower stalls, with greenboard and other water-resistant drywall panels kept only to high-humidity areas.

Does a bathroom need mold resistant drywall?

Installing moisture resistant drywall in the bathroom can help prevent growth of mold. … Regular drywall will not protect your property from water and mold damage. You will have to replace your cheap drywall if it’s exposed to moisture or mold.

Can drywall be used in bathroom?

Drywall for bathrooms has special moisture-, mold- and mildew-resistant qualities, but it’s not 100 percent waterproof. Tub and shower surrounds require the use of other materials like backer board, but it’s common to use green board or MMR drywall on the walls and ceilings.

Can you paint waterproof drywall?

There are several ways to waterproof your drywall. However, the most cost-effective and time-efficient way to waterproof your drywall is to paint the surface using a waterproofing primer.

Which direction should you hang drywall?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits.

When should you use 5/8 drywall?

5/8-Inch-Thick Drywall These panels are commonly used for ceilings or for walls that require a prescribed fire-resistant rating. When installed on ceilings, 5/8-inch-thick panels are less susceptible to sagging between the joists than 1/2-inch panels.

What kind of drywall do you use for a bathroom ceiling?

Conventional drywall is commonly used for ceilings in non-shower/tub areas of bathrooms, although some builders prefer to use moisture-resistant drywall — aka greenboard — instead. Moisture-resistant drywall is similar to standard drywall but has face paper that’s treated for extra resistance to mold and moisture.

How far apart are studs?

The general spacing for wall studs is 16 inches on center, but they can be 24 inches. At my home, the exterior wall studs are spaced at 24-inch centers, but the interior walls are 16 inches on center.

What size drywall should I use in garage?

The most common drywall panel size measures 4 feet by 8 feet, and if the garage walls are 8 foot high, that’s the optimal size. If the garage walls are 9 feet high, select panels that are 54 inches wide. When installed horizontally, the panels will fit evenly, eliminating the need to cut the panels.

How thick should sheetrock be for walls?

The most common thickness of drywall used in residential interior construction is 1/2 inch. This material is recommended for walls with studs placed 16 inches on center. If the wall studs are placed 24 inches on center, a 5/8-inch drywall is recommended.

What is the lightest drywall?

What Is Greenboard Drywall and How Is It Used? Ultralight drywall is a generic term for a building material that is about 25 percent lighter than standard drywall. A panel of 1/2-inch thick ultralight drywall weighs 13 pounds less than standard 1/2-inch thick drywall sheets.

What does a 4x12 sheet of drywall weight?

However total weights in lbs may differ by size and by brand. By the sheet, standard drywall sheeting comes in at: 4′ by 8′ by ½ is close to 52 pounds 4′ by 12′ by ½ is close to 77 pounds.

Does drywall have Vocs?

USG SheetRock The SDS sheets claim 0-VOC. … The “regular” drywall should contain the least amount of additives. They use recycled paper backing and facing, but there should be no mildewcide, fiberglass, or other major additives.

Is it better to nail or screw drywall?

While nails tend to be more flexible and hold up better against shear pressure—or lateral force—screws have much better grip and tensile strength, which ultimately keeps drywall from pulling away from the studs. When it comes to holding power, screws simply can’t be beaten.

Do I need a pilot hole for drywall screws?

Drywall screws are threaded nearly all the way to the head. … You not only need to drill a pilot hole for the threads but also a wider counterbore hole the length of the unthreaded shaft and then a countersink hole for setting the head.

Should I use coarse or fine drywall screws?

Fine-thread drywall screws are best for installing drywall to metal studs. Coarse threads have a tendency to chew through the metal, never gaining proper traction. Fine threads work well with metal because they are self-threading. Fine-thread drywall screws do not hold as well in wood as do coarse-thread screws.

What side of purple drywall faces out?

When hanging PURPLE drywall, which side faces out? Always hang PURPLE drywall with the purple side out, or facing into the room. It decorates like standard drywall, which means the purple won’t be visible under white or lightly colored paint.