What is Hardieflex

The applications for HardieFlex™ Sheet cover a wide range of design solutions for residential and light commercial buildings. HardieFlex Sheets are suitable for use in extensions, second story additions and gable ends. It can also be used to line porches, verandahs, carports and for soffits and eaves.

What is HardieFlex used for?

The applications for HardieFlex™ Sheet cover a wide range of design solutions for residential and light commercial buildings. HardieFlex Sheets are suitable for use in extensions, second story additions and gable ends. It can also be used to line porches, verandahs, carports and for soffits and eaves.

What is the component of Hardiflex?

HardieFlex Sheets are a cellulose fibre reinforced cement building product. The basic composition is Portland cement, ground sand, cellulose fibre and water.

What is a HardieFlex?

HardieFlex® Fiber Cement Board 4.5mm is the best ceiling solution for internal residential applications greater than 6sqm, and as a standard solution for internal walls exposed to low traffic. It is fire-resistant and deemed to be non-combustible.

What is the color of Hardiflex?

Hardiflex building boards are available in a range of stock lengths, widths and thicknesses. They come in a natural grey colour with an off-the-machine smooth surface which will readily accept most applied finishes. they can be identified by the Hardiflex brand name printed on the reverse face of the sheets.

Can I use Hardiflex for exterior wall?

HardieFlex® Senepa is used as backing for roof gutters and to enhance roof designs. HardieFlex® Eaves are used with an extension of the roof over the side of the house. HardiePlank® Siding adds protection and design value to a home. It can be used both externally and internally as design accent to a home.

What is fibre cement used for?

It can be used to cover the exterior of a house and also as a substitute for timber fascias and barge boards in areas that are subject to high fire danger. As well as cladding, fibre cement is also commonly used as a tile underlay on decks and in bathrooms and also for soffit/eave linings.

What is a Villaboard?

Villaboard™ is a heavy-duty wall lining compared to plasterboard. … Use it on walls and ceilings in bathrooms, laundries, kitchens and high-traffic areas, and even in multi-residential and commercial buildings.

Is HardiFlex anti termite?

HardiFlex building boards are as durable as they are adaptable – they will not burn, are resistant to permanent water and termite damage and when installed as directed, are resistant to rot and warping.

Is fiber cement siding termite proof?

Why Use Fiber Cement Siding? It’s the only type of siding that combines the performance of masonry—minimal upkeep; rot-, fire-, and termite-proof; unaffected by wind or cold—with the look of painted wood clapboards, shingles, even stone or brick.

Article first time published on

Can HardiFlex get wet?

Once installed, HardieFlex sheets are resistant to damage caused by moisture, so there is usually no need to replace your wall or ceiling if some moisture gets in.

Does HardiFlex burn?

Advantages HardiFlex building boards are as durable as they are adaptable – they will not burn, are resistant to permanent water and termite damage and when installed as directed, are resistant to rot and warping.

What is the size of HardiFlex Philippines?

ITEM NO.DESCRIPTIONSIZE / DIMENSION1HARDFLEX4ft x 8ft, 3.5mm thikness2HARDFLEX4ft x 8ft, 4.5mm thickness3HARDFLEX4ft x 8ft, 6mm thickness4HARDFLEX4ft x 8ft, 9mm thickness

Can I paint Hardiflex?

The most economical type of paint recommended for HardieFlex fiber cement boards are water-based (latex) paints. Acrylic, vinyl, and PVA are all water-based paints as well. … Oil-based (alkyds or enamel) paints can also be used on HardieFlex fiber cement boards, although they would cost more than water-based.

What is Hardiflex for ceiling?

HardieFlex® Ceilings are flexible and may be used in curved seamless and panelized or tiled designs. It can also be used for wet area applications (such as areas of bathroom, kitchen, laundry area).

What is a Ficem board?

Fiber cement board is a building material typically used as siding or trim. This material was designed to provide a product that is durable and able to withstand climate extremes. Fiber cement boards require little maintenance and offer several advantages over traditional siding materials such as vinyl or wood.

What is Fibre cement?

Fibre cement, or Fibre Reinforced Cement (FRC), is a versatile building material developed by James Hardie in the early 1980s. Fibre cement is a composite material made of cement reinforced with cellulose fibres. … Portland Cement: binds the ingredients. Made with limestone, clay, and iron.

Is Hardiflex good for fascia board?

HardieFlex® Senepa 9.0mm is a versatile fascia board suitable for all types of houses. It can be used to highlight intricate roof designs and it operates as backing for gutter systems to prevent water and vermin from entering the structure through the eaves line.

Can cement board be used outdoors?

Made with Portland cement, aggregate and fiberglass mesh, it works well with exterior applications. Lightweight and easy to install, our patented EdgeTech® Technology allows a closer nail or screw application.

Is Hardiflex rat proof?

Versatile, preferred building material Filinvest also discovered another benefit: high-quality HardieFlex® fiber cement boards are effective against damage caused by rodents. It has enough toughness to prevent rats from creating holes in the panels.

What wood is naturally termite resistant?

The wood that is most resistant to termites, naturally, is teak wood, followed by redwood. Both teak and redwood are hardwood species, but that doesn’t mean all hardwood species are resistant to termites.

Is gypsum board termite proof?

Synthetic gypsum, which is now used in about 30% of drywall, is a by-product of coal-fired power plants. … EcoRock drywall, which creates 60% less dust, is resistant to termites and is 50% more resistant to mildew and mold.

What does Villaboard look like?

Villaboard is a smooth, sanded flat fibre cement sheet with recesses on the long edges for flush jointing and a seamless finish. Produced by fibre cement pioneers James Hardie, this material can be painted, tiled or even wallpapered depending on the use of the area.

Where do you use Villaboard?

Villaboard™ lining is a premium sanded fibre cement sheet with recessed edges for flush jointing. Villaboard™ lining is an ideal internal lining for bathrooms, laundries, kitchens and high traffic abuse areas. It is not suitable as an external wall cladding.

Can I screw Villaboard?

According to both gyprock and villaboard, any tiled and/or wet area should only be fastened with screws.

What are the disadvantages of fiber cement siding?

• It is not available for direct order from the manufacturer. …
• It comes with a higher labor cost than other materials. …
• It requires you to re-paint the siding at some point during its lifetime. …
• It is not a recyclable material.

How often does fiber cement siding need to be painted?

If you purchase prefinished fiber cement siding, you don’t need to worry about painting it when it’s time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

Is fiber cement siding expensive?

Fiber cement siding costs $5 to $25 per square foot, including materials and labor. The materials alone cost between $1 and $15 per square foot, and labor ranging from $4 and $10 per square foot.

Is FC sheet waterproof?

Fibre cement cladding is a popular choice for builders because it is simple to install and brings with it a host of benefits. It is weather-proof and resistant to water. This means you don’t have to contend with rot or warp as a result of weathering or water damage.

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

How hot does Hardie get?

TaoFibre® ceramic fiber millboard maintains its strength and thermal stability throughout a wide temperature range up to 2300 ºF.”