What Foamular 250

FOAMULAR® 250 Extruded Polystyrene (XPS) Rigid Foam Insulation is great for many residential and commercial construction applications such as wall furring, perimeter/ foundation, cavity wall, pre- cast concrete, under slab, crawl spaces, sheathing and other applications.

What is Foamular 250 for?

FOAMULAR® 250 Extruded Polystyrene (XPS) Rigid Foam Insulation is great for many residential and commercial construction applications such as wall furring, perimeter/ foundation, cavity wall, pre- cast concrete, under slab, crawl spaces, sheathing and other applications.

What is the R-value of Foamular 250?

(1) “R” per inch: 5.0 (at 75°F mean temperature).

What type of foam is Foamular?

Owens Corning® FOAMULAR® & FOAMULAR® NGX™ 250 Extruded Polystyrene (XPS) Rigid Foam Insulation is a closed cell, highly moisture-resistant rigid foam board well suited to meet the insulation needs for a wide variety of residential and commercial building applications.

What is Foamular used for?

A: FOAMULAR® Insulation is used in many residential and commercial construction applications. Its uses range from below grade in foundations, to under concrete slabs, to all types of wall construction (steel and wood stud, masonry and concrete), and in commercial roofing systems.

Is rigid foam insulation safe?

As an insulation it is non-toxic, and unlike foam products there are no blowing agents that will off-gas into your home. That means it can lead to cleaner indoor air quality, and the R value will never change, whereas foam products will deteriorate over time as the gases escape.

Which is better EPS or XPS?

Due to its physical properties, XPS has a higher r-value than EPS at 4.7 per inch. … However, the blowing agents used in the manufacturing process were known to deplete overtime, reducing the insulation value.

Does XPS melt?

XPS insulation meets its melting point typically between 200 degrees and 210 degrees Fahrenheit.

Is Foamular closed cell?

Owens Corning® FOAMULAR® 250 Extruded Polystyrene (XPS) insulation is a closed-cell, moisture-resistant rigid foam board well suited to meet the needs for a wide variety of building applications.

Does foam board insulation reduce noise?

Using Styrofoam Insulation for Soundproofing Polystyrene boards, whether pink, blue, white, or another color, are usually used in construction, but it has other applications as well. Acoustically it can reduce and muffle, or help block noise from entering or leaving a room.

Article first time published on

How strong is extruded polystyrene?

XPS foam board is quite dense — 2.18 pounds on average per cubic foot. That makes it very durable.

Is XPS foam board a vapor barrier?

XPS is manufactured in both an unfaced form or with different plastic facings. However, XPS is considered a vapor retarder, not a vapor barrier. … Innovative applications of EPS and XPS have improved a building’s envelope thermal performance.

Is Foamular safe for crafts?

Artisans from around the world have used FOAMULAR® XPS foam to craft some truly amazing objects. The foam boards can be easily cut and sanded to virtually any shape or design.

Is Foamular safe?

Skin: No effects expected. Inhalation: Dust may cause irritation of respiratory tract. Ingestion: Ingestion of this product is unlikely. … OSHA Regulatory Status: This product is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

Is Foamular XPS or EPS?

Owens Corning FOAMULAR® 250 Extruded Polystyrene (XPS) Insulation is a closed cell, moisture-resistant rigid foam board well suited to meet the needs for a wide of building applications.

Is EPS and XPS the same?

Extruded polystyrene insulation (XPS) is manufactured using a process of extrusion. … Expanded Polystyrene insulation (EPS) is manufactured using beads of foam within a mould, heat or steam is then applied directly to the beads which causes them to expand and fuse together.

Is XPS fire rated?

There are many listed fire rated wall assemblies that contain Styrofoam™ Brand XPS Insulation or Thermax™ Brand Insulation. The following table lists many of the wall assemblies which contain foam plastics and meet the fire resistance wall requirement.

What does EPS stand for?

Earnings per share (EPS) is calculated as a company’s profit divided by the outstanding shares of its common stock. The resulting number serves as an indicator of a company’s profitability. It is common for a company to report EPS that is adjusted for extraordinary items and potential share dilution.

What is the healthiest type of insulation?

Cork. When it comes to healthy insulation, cork tops the list, at least according to a report done by Energy Efficiency For All. …
FIberglass. …
Cellulose. …
Recycled Cotton. …
Sheep’s Wool.

Is polystyrene foam board toxic?

Most rigid polystyrene foam insulation boards, both the EPS and XPS types, contain the toxic flame retardant HBCD, which was banned by the European Union in 2015.

Does polystyrene go off gas?

Polystyrene is biologically inert – so microorganisms have a a really hard time eating it. … But burning polystyrene releases large amounts of Carbon Monoxide, along with Styrene and a slew of other toxic chemical compounds into the environment which are known to be hazardous to our health.

What is Foamular made from?

FOAMULAR® Extruded Polystyrene (XPS) Fabrication Billets are manufactured from rigid sheets of foam made using Owens Corning’s patented Hydrovac® process technology.

What R value do I need for a walk in cooler?

The industry standard for walk-in coolers is an R value of 25. Going up to R30 will save you even more money, especially if you are keeping your cooler at 40°F or below. We recommend using either spray foam or rigid foam insulation.

How thick is XPS?

This bulletin provides thermal conductivity, thermal resistance, density and compressive strength for FOAMULAR® 150, 250, 400, 600 and 1000 insulation in thicknesses of 2″, 3″ and 4″.

Which Foamular for basement walls?

Concrete walls let cold from the ground transfer directly into the basement. When FOAMULAR® rigid extruded polystyrene (XPS) foam insulation is installed directly against the foundation wall, your customers can enjoy insulated comfort in their basement living space.

What does polystyrene look like?

Polystyrene can be solid or foamed. General-purpose polystyrene is clear, hard, and brittle. It is an inexpensive resin per unit weight. … As a thermoplastic polymer, polystyrene is in a solid (glassy) state at room temperature but flows if heated above about 100 °C, its glass transition temperature.

What is the difference between EPS and PIR insulation?

Expanded Polystyrene (EPS) has been left completely unaffected by the shortage of PIR insulation, as the manufacturing of EPS requires different raw materials. The cost difference between EPS and PIR can be as high as 20 percent, meaning you should see a substantial savings when you make the switch to EPS.

What is XPS board used for?

Extruded Polystyrene Board is ideal for a range of uses – from wall and ceiling insulation, cool rooms & refrigeration, under concrete slab (i.e. car park), and even for architectural modelling or hobby model making. Extruded Polystyrene is the ideal insulation material for houses and commercial applications.

Is Polystyrene an air barrier?

Unless the EPS foam board you use is qualified by the manufacturer as being an air barrier, you must install an air barrier in addition to the EPS foam currently being used.

Which insulation is best for soundproofing?

When soundproofing is your goal, your best options out there are fiberglass insulation and blown-in cellulose insulation. Both materials are incredibly good at their jobs; they insulate incredibly well but also have the coveted noise-reducing properties that many homeowners are seeking.

Is polystyrene foam good for soundproofing?

Polystyrene can be used for the purposes of dulling noise or providing a barrier for sound to travel outside of its immediate space. However, Polystyrene is not ideal for soundproofing professional environments like a music studio, but it is effective in the simplest form of soundproofing.