What does it mean when your invisible fence beeps

If your Invisible Fence control panel is beeping every second, the most likely issue is that you have a wire break somewhere on your property. … If your Invisible Fence control panel is beeping with a lengthy pause between each beep, it’s possible your backup battery unit needs to be replaced.

How do you reset an invisible fence transmitter?

Some models have a battery-operated fence component that helps with the signal transmission. Plug in the transmitter. The system and transmitter should reset automatically upon being plugged back in. Wait for a few seconds and look for any abnormality in the lights.

Why is my dog watch hidden fence beeping?

If there is a break in the boundary wire, you will hear an alarm coming from your DogWatch transmitter. If there is a wire break, the signal is interrupted and the fence will not work. If you hear this alarm, we recommend contacting your local DogWatch Dealer as soon as possible.

How do I check the battery in my invisible fence collar?

Insert the coin in the slot on top of the Power Cap unit and turn it 45 degrees counter-clockwise. Do not push down while turning. The Power Cap unit will rotate while the spring inside will push the Power Cap battery out of the Computer Collar unit battery chamber.

How long do invisible fence batteries last?

We recommend changing the battery every 3 months. Using a fresh, genuine Invisible Fence Power Cap battery is the safest, easiest and most reliable way to guarantee your pet’s safety 100% of the time.

Why is my petsafe collar beeping but not shocking?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

What does blinking green light mean on Invisible Fence?

When you first insert the battery into your receiver, the status light will flash green. This indicates that the receiver has started properly. In the event that the lights do not flash, check the battery to be sure that it has been inserted properly.

How do you change the frequency on an invisible fence collar?

Take off the back panel of the remote and/or transmitter (some units come with both a walkie-talkie-looking transmitter plus a remote button). Search the back panels for any option to change the frequency. In the old days, there were actual analog dials that you could move up and down to change the frequency.

How do you find a buried invisible fence wire?

1. Make sure your invisible fence is plugged in and turned on. You should see an indicator light on the radio transmitter unit confirming this. …
2. Find the radio frequency that your invisible fence is using. …
3. Walk through your yard with the AM radio tuned to the correct radio frequency.

Will Invisible Fence work without backup battery?

This backup should keep your dog safe and if the power remains out for several days you just need to replace the batteries when they run out. This means you can keep the system working as usual indefinitely as long as you have enough batteries.

Article first time published on

How do I find the break in my invisible fence with RF choke?

Great little tool to diagnose your dog’s invisible fence when you suspect that the line has been broken. Just pair it with a portable AM radio and turn the volume up loud. Then in my case, tune it to AM 600 and you will hear a pulsating or throbbing electronic sound through the speaker.

Why is my petsafe collar blinking green?

The receiver collar will emit a unique double tone as the contact points touch your pet’s skin. You will know that you have the proper fit when you hear the receiver collar emit the double tone and it flashes green 5 consecutive times. 10. After 90 seconds, the receiver collar moves into normal operation mode.

Where is the button on my invisible fence collar?

Check the Dog Collar Settings Locate the push button on your dog’s collar. Depending on the collar’s model, the buttons may be inverted, requiring a pen-push, or they may be clearly visible. Most collars have at least five shock strength settings, indicated by a series of beeps or a light that blinks in series.

Why does my dog's shock collar keeps beeping?

Please restart the collar by simply by taking out the battery than put it back. Try to use the collar on low sensitivity setting first then change the sensitivity according to the dog’s barking. If still you see the continuous beeping, please put a new battery. … It’s because the battery is low.

How do you reset an electric dog collar?

Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.

How do I know if my shock collar is working?

Touch both points on the collar while it is ticking or beeping. If you do not feel a shock, then there may be a problem with the receiver collar. Make sure you touch both points on the receiver at the same time when you hear the collar beeping. It will tell you definitively that the fence is or is not working.

Can you test a shock collar on yourself?

Test the Collar on Yourself The easiest and safest route to testing the collar’s shock stimulation on yourself, is by simply placing your hand, arm or finger across BOTH contact points.

How do I know if my pet safe collar is working?

All you have to do is hold the tool against the contact points on your dog or cat’s receiver collar to check if the collar is working properly. The test light tool will light up if static correction is being activated.

Why is my dog's shock collar not working?

Check that the battery on the receiver collar is fully charged and replace it as needed. … Next, confirm that the transmitter and collar are properly synced. Then check that you haven’t set the correction level so low that it isn’t responding. Lastly, check the fit of the collar on your dog.

How close can a dog get to an invisible fence?

The boundary zone or distance from the wire that the collar will start to warn/correct your dog is adjustable. The smallest distance you can set with this fence is about 2-3 feet, we suggest no less than 3. And it goes up to about 10 feet.

How deep are invisible fences buried?

In most cases, the wires should be buried in a trench that is between 1 and 3 inches deep; burying the wires at this depth allows adequate transmission of the signal, while protecting the wire from damage from lawn mowers and other activity on the lawn.

Why is my underground fence not working?

Check for a break in the underground wiring of the invisible fence. Most invisible fence units register an error if there is a break in the fence. It should either flash red lights or set off an alarm. Remove the ends of the fence wire from the transmitter jacks and replace them with the ends of a spare piece of wire.

How do you find a partial break in an invisible fence?

Plug in the Fence Transmitter and check the Loop Indicator Light. If the Loop Indicator Light is on you can assume the break is in the other half of the Boundary Wire. If the Loop Indicator Light did not come on and you hear a continuous beep, you may assume there is a break in this portion of the Boundary Wire.

What frequency do invisible fences use?

Invisible Fence compatible collar for fences running on the 10k frequency.

What gauge is invisible fence wire?

20-gauge wire is what you will find in most pre-packaged do-it-yourself fencing kits. Most professionally installed systems use the more substantial 14 or 16 gauge wire.

How long should a dog collar battery last?

It should last 3-4 years. It depends how long your pet is outdoors.