How much does a 60000 BTU furnace cost

Furnace Size (BTU)Typical Furnace Cost with Installation*50,000$2,300 – $3,80060,000$2,500 – $4,20075,000$2,700 – $4,60080,000$3,000 – $4,900

How many square feet does a 60000 BTU furnace heat?

A standard that is used by heating and cooling equipment companies is to provide at least 25 to 30 Btu of heat per square feet in the home for a moderate to warm climate. A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly.

What is the average cost to replace a gas furnace?

A furnace replacement costs $2,000 to $5,400 on average for a new home furnace and installation labor. A gas furnace replacement costs $3,300 to $6,900 for a high-efficiency heating system. New furnace prices depend on the system size, efficiency, brand, fuel type, and install labor. Most furnaces last 15 to 30 years.

How much does a Goodman 60000 BTU furnace cost?

Goodman Furnace SizeFor Home SizeUnit Cost With InstallationGoodman 50,000 BTU800 – 1200 sf$1,860 – $1,880Goodman 60,000 BTU1000 – 1400 sf$2,290 – $2,270Goodman 70,000 BTU1200 – 1600 sf$2,420 – $2,480Goodman 80,000 BTU1400 – 1800 sf$2,710 – $2,710

Is 60000 BTU furnace good?

A 60,000 BTU gas furnace will effectively heat a space of up to 1,800 square feet. This makes a 60k BTU furnace ideal for most homes, smaller offices, small businesses, and storefronts. In a moderate to warm climate, you need between 25 and 30 BTU of heat to warm up a square foot.

How big of a furnace do I need for a 1500 sq ft house?

Generally in a Californian climate you will need 25-30 BTU per square foot. BTU is a measurement of a furnace’s heat output. 1500 sq feet by 25 BTU gives us a 37,500 BTU furnace.

What is the correct size furnace for a 1500 square foot house?

A 1,500-square-foot home will require between 45,000 to 90,000 BTUs. A 1,800-square-foot home will require between 55,000 to 110,000 BTUs.

How much does a 60000 BTU furnace weigh?

60,000 BTU 96% AFUE Variable Speed Goodman Gas Furnace – Upflow/HorizontalWeight (in lbs)114.000000Exhaust Flue RequirementPlastic / PVCManufacturerGoodmanFurnace Efficiency / AFUE96%

What brand of furnace is the best to buy?

#1 Heil / ICP Brands. Quality. Warranty. …
#2 Goodman. Quality. Warranty. …
#3 Rheem / Ruud. Quality. Warranty. …
#4 Maytag. Quality. …
#5 Trane / American Standard. Quality. …
#6 Carrier / Bryant. Quality. …
#7 Armstrong / AirEase. Quality. …
#8 York / Johnson Controls. Quality.

Are Goodman furnaces bad?

There are no furnaces to definitely avoid. Amana, Daikin and Goodman: These are mostly identical furnace brands and have some of the best warranties in the industry. All furnaces have 10-year parts and Lifetime heat exchanger warranties. These are solid brands – no cheap furnaces.

Article first time published on

Why is furnace installation so expensive?

HVAC installation is quite expensive, probably because it has emerged to be an immensely specialized trade. Owing to controlling humidity, thermodynamics, airflow, refrigerant, electrical, and plumbing, it is now high on demand.

How much does a furnace cost for a 1500 square foot house?

For example, a 700- to 1,500-square-foot home will require a BTU rating between 40,000 and 60,000, which will cost between $2,000 and $3,000. A furnace for a home ranging in size from 2,000 and 5,000 square feet will need between 125,000 and 150,000 BTUs and will cost in the neighborhood of $3,300 to $6,500.

How much does it cost to buy and install a furnace?

Furnace TypeAverage Unit CostAverage Installation CostNatural Gas Furnace Installation$1,825$5,500Propane Gas Furnace Installation$1,400$3,750Oil Furnace Installation$1,500$4,000Electric Furnace Installation$850$3,000

How many tons is a 60000 BTU furnace?

BTUTon42,000 BTU3.5 Ton48,000 BTU4 Ton60,000 BTU5 Ton80,000 BTU6.65 Ton

How many BTU is a typical home furnace?

Because home heating needs vary widely, furnaces are available with BTU ratings ranging from 40,000 to more than 200,000 BTU. Most furnaces fall somewhere in the 80,000 to 100,000 range.

Can a furnace be too big for a house?

Having a furnace that’s too big for your space is extremely inefficient. There are two simple signs that indicate that your furnace is most likely oversized: Your furnace runs for a short period of time before shutting off. Your home has uncomfortable hot and cold rooms.

Is it better to undersize or oversize a furnace?

An undersized furnace will work fine for the majority of the time, but every once in a while it won’t get the house quite as warm as desired. … An over-sized furnace will keep the house warm no matter how cold it gets outside, but it does so at a cost. First, it will probably make the house less comfortable.

Is a higher BTU furnace better?

A heater with a higher BTU rating is more powerful — that is, it has a higher heat output — than one with a low BTU rating. It can do more to raise the temperature in your room each hour, so you can either heat a room more quickly or heat a larger space.

How long does it take to install a furnace?

4-8 hours. Furnace installation in a residential home usually takes 4-8 hours, depending on the complexity of the job. Additional time may need to be added to account for ductwork, electrical, or gas line modifications to properly match the new equipment.

How many square feet will a 70 000 BTU furnace heat?

Furnace CapacitySquare Footage(Hot Climate)Square Footage(Cold Climate)70,000 BTU2,320 sq ft1,270 sq ft80,000 BTU2,650 sq ft1,450 sq ft90,000 BTU3,000 sq ft1,630 sq ft100,000 BTU3,320 sq ft1,810 sq ft

Do you count the basement when sizing a furnace?

When including a finished basement, use 1/2 of the finished basement square footage with the rest of the area being calculated. mobile homes. In determining a furnace that is right for your needs you will need to determine the direction in which the heated air flows or is discharged from the furnace.

How long should you keep a furnace?

How long does a traditional furnace last? An average furnace is designed to operate for 15 to 30 years in a home. The easiest way to increase the life cycle of your furnace is to hire a certified technician to perform maintenance and repairs once a year.

What is the quietest furnace on the market?

The Carrier Infinity 98 family of gas furnaces now includes the quietest gas furnace that you can buy. Carrier has announced that the 59MN7A06017-14 gas furnace has achieved the lowest sound rating which exceeds all other comparable products.

What is the longest lasting furnace?

Lennox furnaces are of the longest running American furnace companies. They offer top-end central air units and whole-home furnaces. Lennox offers more quiet options equipped with variable blower motors. It is a great option for any of your HVAC installation needs, especially a new furnace.

How do you size a furnace?

Calculate the square footage of your home. …
Find out What Climate Zone Your Home Is In Climate is another factor that helps determine how many BTUs you need to heat your home. …
Multiply your square footage by 40, the lower number recommended for the climate zone.

Is a 96 furnace worth the extra money?

A 96% AFUE gas furnace is top of the line, powerful, and efficient. In fact, a 96% AFUE gas furnace is one of the most efficient gas furnaces available. … After all, the difference in price between an 80% AFUE gas furnace and a 96% AFUE gas furnace is not nothing.

Is a Goodman furnace good?

Goodman gas furnaces have good AFUE ratings of between 80% and 98%, so they’re energy-efficient, although models with ratings between 80% and 90% would be more suited to warmer climates. Goodman is known for having some of the best warranties on the market.

How much is a Goodman gas furnace?

The average Goodman gas furnace cost can range from $2,055 to $3,250 in total installation costs. Your exact HVAC installation costs will largely depend on the size furnace system needed for your home and the AFUE level.

Is Goodman as good as Trane?

Conclusion, Trane XL20i Or Goodman DSXC18 In basic features, performance and efficiency either of these units make for a great and comparable buy. In either unit, a buyer can find some features that are unique to that unit.

Are Rheem and Goodman the same?

The Goodman system is the same as Rheem where one can buy it piece by piece. It is always recommended with high SEER equipment that matching equipment is installed. This means the air handler should be matched to the condenser to get the rated efficiency levels listed on the equipment.

What SEER rating should I buy?

There’s no magic SEER number. Anything over 13 is great. Because if you have an old 8 SEER system and replace it with a 16 SEER unit, you could significantly reduce the cost of cooling your home. Don’t forget to look at tax credits and manufacturer’s rebates that can bring the down the cost of a high SEER system.