How long does Hardie plank siding last

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

How often do you replace hardiplank?

Normal siding needs to be repainted once every 5 to 7 years, but James Hardie siding is made from fiber cement and doesn’t need to be repainted quite so often– a paint cycle can last as long as 12 years, and the paint prefinished James Hardy siding is warranted for 15 years.

How often does Hardie board need repainting?

Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

Does Hardie board deteriorate?

Fiber cement siding products are painted. This means they periodically require re-painting to maintain a beautiful appearance. This is one of the worst problems with Hardie siding considering it’s not an option. If you don’t paint the siding every 7-10 years, on average, it’ll start to fade and/or peel, crack or chip.

What is the life expectancy of Hardie board?

With the proper care, your James Hardie fiber cement siding will outlast its 30-year warranty. It can even last up to 50 years if cared for properly.

Does James Hardie siding rot?

James Hardie® siding, unlike wood or vinyl siding, will not rot, warp, or burn. HardiePlank® is a fiber cement based siding, so it’s impervious to water, termites, woodpeckers, and any other animal you can think of.

What is the longest lasting house siding?

Vinyl Siding: 60+ years (warranties last between 20-40 years) Fiber Cement Siding: 50+ years. Stucco Siding: 50-80 years, depending on how it is backed. Metal Siding: Up to 40 years.

Does hardiplank siding crack?

Hardie board siding usually cracks due to poor installation. The original installer might have accidentally installed a nail too close to the edge of the siding, causing a crack. You can easily fix it by cleaning it and then using caulk to patch the gap. … “This can happen again after caulking.

Does caulking Hardie board void the warranty?

These such areas are called “field butt joints.” In the case of James Hardie’s Color Plus siding, which has a pro-rated 15-year warranty, using caulk at field butt joints will flat out void your warranty!

Can you pressure wash HardiPlank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Article first time published on

Is hardiplank expensive?

You can expect it to be more expensive than vinyl siding, but it’s cheaper to use than brick or stucco and about the same price as other composite sidings. On average, Hardie board siding costs $10 per square foot — so, for example, a 1,200-square-foot exterior wall would cost around $12,000 to install.

Should you caulk Hardie siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

Does Hardie board soak up water?

Hardie siding does a great job of wicking moisture when it is installed on the wall, but when it’s uncovered and flat on the ground it will absorb water. … And if a board does get wet, but is not sitting in moisture for an extended period of time, you can simply let it dry out before installing.

Is Hardie plank waterproof?

Hardie siding is waterproof, fire resistant, and pest and insect resistant, which means that not only will the siding last, but it will protect the interior of your home for longer, without warping or breaking.

What is the most popular siding?

Vinyl siding is one of the most popular choices in the United States. …
Vinyl is a relatively low-cost siding option. …
Metal siding is durable and stands up well to harsh weather conditions like snow and extreme temperatures.

How much would it cost to side a 1500 square foot home?

An average 1,500 square foot house would cost around $7,700 for standard aluminum siding and upwards of $11,000 for custom grades after labor and material costs.

How much does it cost to replace siding on a 1500 square foot house?

Size of Home1 Square (100-square-foot) Siding Boxes NeededCost1,000 square feet10$1,6001,200 square feet12$1,9201,500 square feet15$2,4001,800 square feet18$2,880

Do you need insulation under Hardie siding?

Hardie Plank is a cement board; it’s composition is sand and water. It is heavy on the wall and provides no insulation value. Formed to resemble wood, it fails to provide a deep, rich grain and does not come close to the look of wood. It is highly susceptible to mold and mildew.

Is Hardie siding fireproof?

Amongst the many benefits, James Hardie® fiber cement siding and trim are non-combustible, to help protect homes from unpredictable weather — and worst-case scenarios like wildfires. … Silica is naturally fire resistant and is essential to James Hardie fiber cement’s durability and stability to moisture.

What are the disadvantages of fiber cement siding?

It is not available for direct order from the manufacturer. …
It comes with a higher labor cost than other materials. …
It requires you to re-paint the siding at some point during its lifetime. …
It is not a recyclable material.

Do you need plywood behind Hardie board?

Fiber cement siding should be installed over plywood, OSB, or sheathing. … Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.

Does Hardie board expand and contract?

Fiber cement boards don’t expand and contract much, but leave a little room for expansion at the end joints and then fill the gap with caulk. Butt joints, however, should be nailed tightly together and should not be caulked.

How do you repair Hardie board damage?

To remove and replace damaged siding: Cut the fiber cement siding to length (wear approved dust protection). Blind-nail the fiber cement siding in place, starting with the bottom piece. Face-nail the top piece of fiber cement siding through the old siding. Prime and paint new siding to match the old.

Can Hardie Board touch the ground?

HardiePlank and other types of fiber cement siding have a few points against them when planning a raised vegetable bed: … Ground Contact: While fiber cement siding is made to shed water, it’s not designed to be buried in wet soil.

How do you fill nail holes in James Hardie siding?

The installation guide for Hardie Board, which is a brand of cement board siding recommends using caulking to fill nail holes. When I’ve installed it I used a high-quality exterior paintable calking after smoothing the edge of the holes. Once the caulk is dry you can touch up the paint.

Can you paint Hardie plank?

Yes, you can, and you should. Painting Hardie board siding will significantly improve its look and its longevity. Siding finishes generally last for around 15 years, so you need to do it, and do it right. Painting, when done properly can really bring out the wood feel of the Hardie board.

Who invented Hardie board?

In the mid 1980s, the siding manufacturing company James Hardie pioneered its development. As the industry leader for decades, James Hardie and Hardie board have pretty much become a synonym for fiber cement siding.

Is hardiplank cheaper than brick?

It takes more labor and more time to install brick veneer siding than it does hardi plank, thus making the brick significantly more expensive when comparing on a square footage basis.

How do you remove green mold from hardiplank?

Use your soft sponge or cloth and lightly scrub the mold or mildew with the cleanser. Once it’s clean again, use your water hose to thoroughly rinse the area with water. A man power washing a house. Use caution when using a power washer to clean your fiber cement siding from James Hardie.

How much does it cost to put hardiplank on House?

Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.