N
InsightHorizon Digest

How do I set up vapotherm

Author

Emma Miller

Updated on March 29, 2026

PURPOSE: The Vapotherm device uses membrane transfer technology to generate a high flow of warm humidified gas. Gas can be delivered via nasal cannula at flows of 5-40 L/min and at temperatures of 33-43°C.

What temperature should Vapotherm be set at?

PURPOSE: The Vapotherm device uses membrane transfer technology to generate a high flow of warm humidified gas. Gas can be delivered via nasal cannula at flows of 5-40 L/min and at temperatures of 33-43°C.

How do I reset Vapotherm?

To reset, first disconnect the unit from AC power and then press the Run/Standby Button. With the exception of O₂ sensor replacement, the unit must be repaired by an approved service facility. Cartridge and/or DPC not detected. Unit will not run.

How does Vapotherm work?

Vapotherm high velocity therapy delivers optimally humidified medical grade vapor that may help mobilize secretions present in respiratory infections, such as pneumonia. The system uses a membrane filtration technology, as opposed to a water-pot humidifier.

Is Vapotherm the same as high flow?

Vapotherm high velocity therapy often gets conflated with commodity high flow oxygen products, also commonly known as High Flow Nasal Cannula (HFNC).

How much oxygen does Vapotherm use?

The flow rates may be from 1 to 40 liters per minute via nasal cannula.

How low can Vapotherm go?

NOTE: The Precision Flow® may be operated with limited performance at gas inlet pressures as low as 4 psi (28 kPa). However, for the full specified range of gas flows and oxygen percentages, both gas inlet pressures must be 40 psi (276 kPa) or above.

How many liters can a Vapotherm go up to?

While clinicians should titrate flow to clinical effect, Vapotherm high velocity therapy generally achieves clinical efficacy between 25-35 LPM in adults, 6-8 LPM[4,5,6] in neonates, and for pediatric patients it is recommended to set the flow at 1.5-2LPM per kilogram of bodyweight, up to 8kg.

Is Vapotherm high flow nasal cannula?

How is High Velocity Therapy Different from Common High Flow Nasal Cannula? While common HFNC uses large bore cannulas, Vapotherm high velocity therapy uses a small bore cannula system. By generating high velocity, this therapy flushes the upper airway dead space faster than common HFNC.

What is Vapotherm nasal cannula?

Background: Vapotherm 2000i is a non-invasive high-flow respiratory support system used mainly in the treatment of type 1 respiratory failure. It uses a mixture of oxygen and air to deliver a set concentration via nasal cannula (or tracheostomy mask).

Article first time published on

What is adult Vapotherm?

Vapotherm high velocity therapy offers the ventilatory and oxygenation support patients in respiratory distress need, with the comfort and simplicity of our ProSoft™ soft nasal cannula interface. Patients can eat, drink, talk, and take oral or aerosolized medications without pausing therapy.

Is vapotherm like CPAP?

Vapotherm high velocity therapy has been clinically proven as a mask-free and seal-free alternative to CPAP for both, primary respiratory support for RDS and post-extubation support.

How many Litres is high flow oxygen?

High-flow nasal cannula (HFNC) therapy is an oxygen supply system capable of delivering up to 100% humidified and heated oxygen at a flow rate of up to 60 liters per minute.

How do you administer high flow oxygen?

You will be fitted with high flow nasal prongs which are soft. The nasal prongs will be placed inside your nostrils, then secured with an elastic string which goes around behind your head. The high flow oxygen will be delivered through your nose. The oxygen will feel warm and create a full feeling in your lungs.

What is the highest liter of oxygen?

The highest flow oxygen concentrators output oxygen flow at 10 liters per minute. The Respironics Millennium M10, Invacare Platinum 10, and the AirSep Intensity 10 are three home oxygen concentrator machines that deliver this highest oxygen level.

Does high flow oxygen give peep?

Their data demonstrated that HFNC can generate PEEP of approximately 6–20 cm H2O. However, they did not assess PEEP generated by the full range of flows used in pediatric patients and young adults, nor at 25% or 75% leak.

Does vapotherm help with co2?

High Velocity Therapy Used to Avoid NIV and Reverse Acute Carbon Dioxide Retention in a COPD Exacerbation. Vapotherm does not practice medicine or provide medical services or advice. Vapotherm’s high velocity therapy is a tool for treating respiratory distress.

How much oxygen do you give a patient with pneumonia?

Patients with asthma, left ventricular failure, pneumonia, pneumothorax, trauma, etc, should be treated appropriately for their condition using 40%–60% oxygen via a medium concentration mask (4–10 l/min) for milder cases or a reservoir mask for hypoxic patients and for all major trauma cases.

How often should you change the gas inlet filters for the air and oxygen?

Without adequate air intake, the fuel mixture will be too fuel-rich so won’t burn properly and the engine will be starved of the oxygen it needs. Most manufacturers recommend replacing your air filter every 12,000 miles (approximately 19,000 km) or every 12 months, whichever comes first.

Is vapotherm positive pressure ventilation?

New Analysis Suggests Vapotherm High Velocity Therapy May Be as Effective as Noninvasive Positive Pressure Ventilation (NiPPV) Among Studied Hypercapnic Patients – Vapotherm.

What is BiPAP vs CPAP?

BiPAP refers to Bilevel or two-level Positive Airway Pressure. Like CPAP, this sleep apnea treatment works by sending air through a tube into a mask that fits over the nose. While CPAP generally delivers a single pressure, BiPAP delivers two: an inhale pressure and an exhale pressure.

What is vapotherm NICU?

Vapotherm high velocity therapy is Mask-Free NIV® for spontaneously breathing patients. As such, it is an innovation among NIV modalities as it uses a nasal cannula interface. It is the only mask-free and seal-free therapy clinically proven as an alternative to CPAP for both. Primary respiratory support for RDS.

Is BiPAP used for Covid?

Evidence suggests that bi-level positive airway pressure (BiPAP) support may be used in the hospital setting with appropriate precautions for intubated COVID-19 patients experiencing Acute Respiratory Distress Syndrome (ARDS).