N
InsightHorizon Digest

How can I cover a sectional couch cheap

Author

William Taylor

Updated on April 12, 2026

A cheap and easy way to cover a sectional sofa is to drape blankets and throws over it. You can strategically place them to cover any worn spots or stains and make your sectional sofa look as good as new.

How can I cover a sectional for cheap?

A cheap and easy way to cover a sectional sofa is to drape blankets and throws over it. You can strategically place them to cover any worn spots or stains and make your sectional sofa look as good as new.

How do you cover sectional couches with sheets?

  1. Measure your sofa from side to side to figure out what size sheets you need. …
  2. Remove the cushions from the sofa.
  3. Cut a fitted twin sheet in half crosswise. …
  4. Place a flat sheet on the seat of the sofa. …
  5. Toss the excess sheet on the seat up and over the back of the sofa.

Are there slipcovers for sectionals?

Custom and Ready-Made Armless and Sectional Slipcovers Armless and modular sectional slipcovers offer a tailored construction that goes over the furniture base. Separate seat and back cushion covers are also available.

How do you make a slipcover for a sectional couch?

  1. Step 1: Measure. …
  2. Step 2: Drape Sectional. …
  3. Step 3: Crevice Tuck. …
  4. Step 4: Pin Folds. …
  5. Step 5: Cut Edging. …
  6. Step 6: Fold or Twist. …
  7. Step 7: Hook-and-Loop Tape. …
  8. Step 8: Hide Raw Edges.

How do I find the right couch cover?

Measure the cushion width in the front of the sofa. This is the area below the sofa arms. Measure the length from one side of the sofa to the other. Be sure to measure at the widest point to ensure a better fit, especially if you’ll be purchasing sofa covers that don’t have a lot of stretch.

Can you put a slipcover on a sectional sofa?

Yes, you can put a slipcover on a sectional sofa, but it is recommended to buy a slipcover made specifically for your sectional to ensure a proper fit. Sofas can suffer a lot of damage throughout their lives.

How do you cover an old sectional?

Easier than Slipcovers Use bed sheets. Patterns and colors are almost limitless and they can easily be tucked around the cushions. To hold the sheet securely over the front of the sectional, so it doesn’t hang onto the floor, turn the sofa on its back and use a staple gun to secure the sheet to the underside.

Can you reupholster a couch without removing old fabric?

There is no need to remove the old fabric. … Now, simply tuck your fabric and staple with your hand powered staple gun. I used a compressor and heavy duty staple gun with 1/4″ staples. Be sure to staple to the wood part/frame of the sofa.

What does it cost to have a couch reupholstered?

Couch Reupholstery Cost Reupholstering a couch costs $600 to $4,000, with an average cost of $1,750. You’ll pay $50 to $70 per yard on average for fabric, with labor rates of $40 to $100 per hour. If you have a beautifully-crafted sofa with fabric that needs a little TLC, reupholstery might be a great option.

Article first time published on

How do you cover a chair with a sheet?

  1. Drape the sheet over the chair. …
  2. Pinch one side, and safety pin it from top to bottom down the side. …
  3. Place ribbon around the base of the chair where the backing meets the seat. …
  4. Wrap the ribbon around that base and tie a large bow in the back.

Can you put a slipcover on any couch?

Many upholstered sofas can in fact be slipcovered. It mostly depends on the complexity and the shape of the sofa, but if the sofa is generally symmetrical and the armrests aren’t too rounded it should be A-okay!

Do sofa covers fit all sofas?

Depending on the structure, it is very possible that slipcovers can’t actually be made for your couch as not all sofas were created equally. Given the nature of sofas and how innovative their design can be, around 80% of them should be fairly similar and straightforward.

Is it hard to make a slipcover?

Don’t worry, it’s not hard to make – I’m going to walk you through it step by step. You’ll need to buy the raw cording to make it. I prefer 4/32 size, because most upholstery piping on a new couch or chair will have the thinner stuff, not big and chunky. If you want larger, go for it!

How do you cover a chair without a slipcover?

Pleat the fabric to create a sleek look at the back, and hold the pleats with a few hidden upholstery pins — or wrap a length of contrasting fabric around the chair in a wide band and tie a simple bow in the back; this style works best for chairs with no arms.

How do you reupholster a sectional with attached cushions?

Cut out the required amount of fabric and drape it over the couch. Begin with the cushions and tuck the fabric in tightly all around the cushion and into the crack between cushion and back. Stretch the fabric tightly across the cushion and staple it to the wood frame of the couch as deeply as possible in the cracks.

Can I reupholster a couch myself?

Reupholstering a couch or loveseat isn’t an easy DIY project—it is time-consuming and requires research and note-taking. Once you’re ready to start your new upholstery project, check out our step-by-step guide: Study your couch.

Can I reupholster over existing fabric?

So long as the old fabric isn’t darker than your new fabric, you can even upholster right over it.